Installation & repair

How to disassemble the ceiling fan light cove and many easy ways for maintenance.

How to disassemble the ceiling fan light cove is always a question many families wonder, because it is not always convenient to call a repairman. In addition to chandeliers, ceiling tray lights, floor chandeliers, ceiling fans light cove are also often used to decorate interior spaces nowadays. It is the most widely utilized two-in-one gadget since it provides users with both light and breeze. The engine is often built using the most advanced technology, as a result, the fan always runs quietly and efficiently while moving a lot of air.

This principle makes it difficult to remove ceiling fan lights, especially if you’ve never had to remove bulbs before. It sounds difficult but it really is not if you know how. In this article from, Toby Nwazor will show you how to disassemble the cove ceiling fan and how to maintain it easily. The article has a video on how to install a simple ceiling fan, please watch it to understand better.

Ways to take off ceiling fan light cove

Ceiling fans light not only bring cool air to the house but also play the role of lights, bringing light to the space. They can be installed in the following locations: living room, bedroom, kitchen. Unlike conventional decorative lights, ceiling fans will have a different way of taking off and dismantling. So, how to install a ceiling fan with lights? Let’s find out simple and safe ways that you can do it yourself without a repairman.

Take off ceiling fan light cove

Disconnect and remove decorative light bulbs

For ceiling fans, use a screwdriver to disassemble the bulbs. Usually, the decorative lights on the fan are attached 3-4 screws around, the screw can be in front or behind the decorative glass ball, the light shield, etc. Should have 1 helper to ensure more safety. Disconnect from fan motor system and maintenance tips for ceiling fan light cove

Remove the propeller

You remove the propeller with a screwdriver. Ceiling fan blades are connected to the fan body by metal brackets that screw to the fan body, essentially the housing for the fan’s motor, and to the impeller itself. If you plan to reuse the fan, be sure to keep all the parts. Putting all the parts in a marked bag or envelope is a good idea.

Remove the fan motor

Locate the 4 screws along the edge of the ceiling fan cover, near the ceiling. Check the screws, the two side screws are required to be removed. The other two screws just need to be loosened, as the housing has a slot to allow it to slide out when properly fitted. Remove two screws must be completely removed. Loosen the remaining screws 2 or 3 turns.

Simple tips to remove stuck glass ceiling fan cove lights

How to disassemble the ceiling fan light cove
How to disassemble the ceiling fan light cove

If your home has a ceiling fan with glass cove lights, you may eventually need to remove the glass shades to clean or replace them. But over time, the shades can become stuck due to dirt and debris build-up. Here are some simple tips to help you remove stuck glass ceiling fan cove lights:

1 Put on safety glasses and gloves that provide some grip.

Wearing safety glasses may seem excessive, but they can protect your eyes from serious damage if the glass light cover or bulb breaks. Use leather work gloves with grip pads on the fingertips for the best results.
Alternatively, use a pair of heavy-duty rubber dishwashing gloves, which aren’t as protective but still provide the grip needed to unscrew the light cover.

2. Start by dusting off the shades with a soft cloth.

This will help to remove any surface dirt and debris that may be causing the shades to stick.

3.Support the cover with your fingers

With your fingers, support the cover, press slightly upward, and twist. Spread your gloved fingers and press your fingertips against the light cover’s bottom. Push your fingers gently upward and twist your wrist counterclockwise in one motion.
If the light cover begins to rotate, continue to twist it counterclockwise until it releases and falls off. Next, replace the light bulb.
If the light cover refuses to budge, use gentle tapping to persuade it

4. If the shades are still stuck

Try using a hairdryer on the low setting. Aim the hairdryer at the base of the glass shade and hold it there for a few minutes. The heat from the hairdryer will help to loosen the adhesive that is holding the shade in place.

5. If the hairdryer method does not work

You can try using a putty knife or other flat object to gently pry the glass shade off of the ceiling fan base. Start at one corner and work your way around until the shade pops free.

6. Once the glass shade is removed

Be sure to clean both the shade and the ceiling fan base before replacing the shade. This will help to prevent the problem from happening again in the future.

7.To reinstall the cover, twist it clockwise.

Lift the cover back into place with your gloved fingertips, lightly pressing the threaded rim against the threaded area of the light fixture. Twist your fingertips clockwise until you feel the threads take hold, then continue twisting until you feel moderate resistance. If you overtighten the cover, it will be difficult to remove the next time!

How to remove the ceiling fan light coating with screws

How to remove the ceiling fan light coating with screws
How to remove the ceiling fan light coating with screws

If your ceiling fan is equipped with a light, you will need to remove the glass globe or metal housing that covers the light before you can remove the blade. In most cases, the glass globe or metal housing is attached to the ceiling fan with screws. To remove the glass globe or metal housing, follow these steps:

1. Turn off the power to the ceiling fan at the circuit breaker or fuse box.
2. Use a ladder to reach the glass globe or metal housing.
3. Unscrew the screws that hold the glass globe or metal housing in place. In some cases, there may be a small clip that holds the glass globe or metal housing in place.
4. Carefully remove the glass globe or metal housing from the ceiling fan.
5. Set the glass globe or metal housing aside.


Maintenance tips for ceiling fan light cove

The cleaning of the ceiling fan is basically the same as the operations we clean a normal ceiling fan, but because this is a ceiling fan to decorate the living room, there are more lights and decorative details, so the cleaning is somewhat complicated. complex, requiring more attention to detail and time. Steps to clean decorative ceiling fans:

1.Disconnect the main electrical system and remove the ceiling fan

Identifying the power cords in the box is an important step. Electric ceiling fan lights usually have 3 colors green, white and black. If the ceiling fan’s black and blue wires are connected by a wire from the ceiling, it’s the wiring of the lighting system. You need to remove the blue wires attached to the fan. When all wires are fully separated from the ceiling, hold the fan off the hook and lift it up. The circular maneuver at the top can slide out of the container so it’s a good idea to have someone help you underneath.
In addition, the electrical box in the ceiling must be attached with two screws. It is recommended that you put the screws back into the electrical box after removing the bracket so that they are there for the next fixture you want to attach, convenient for reassembly later.

You can watch this video to better understand how to disassemble.

2.Check exactly what needs to be fixed

Check the ladder again to see if it is sure or have any problems to fix, check the vacuum cleaner to make sure that the use of the machine is not interrupted or encountered any other problems.

3.Carry out maintenance and cleaning of decorative fans.

You need to prepare a bucket containing clean water, a soft sponge (such as a dishwashing sponge) or a soft cotton towel, moisten the sponge or towel, then the cleaning mixture on top and proceed to wipe the fan base first, then proceed to clean the fan blades, then turn to the decorative lights.

Some ways to maintain ceiling fans at home

The lifespan of a ceiling fan depends a lot on how you maintain it. Here are some suggestions for you how to make the ceiling fan operate quietly and use it for a long time.

Cleaning the fan

Cleaning the fan is very simple, does not take too much time, but also helps you save a lot of costs incurred later, maintaining the life of the fan.

Check fan screws

After a while of use, the propeller screws can become loose so you need to check the screws and adjust them carefully. Check that the ceiling fan hook is firmly attached to the ceiling to avoid dangerous situations that cause harm to people

Oiling the ceiling fan motor

Applying oil specifically for the fan motor, avoiding contact with water will make your family’s fan run more smoothly, without making noise.

Installation and replacement of necessary components: when detecting signs of unstable operation of the ceiling fan, you should conduct a thorough inspection and replace new components.

The fastest way to maintain ceiling fan light cove at restaurants – hotels

Currently, with the upward development of technology industries, smart furniture has been favored and used by many restaurants and hotels. The delicate and eye-catching design of the ceiling fan makes the business places even more like it. However, how to maintain and disassemble is also somewhat different from households, you can follow the tips below to clean the fan.

Use pillowcases to clean ceiling fans

Instead of using regular rags, you should reuse the old pillowcases that the hotel throws out to make items. Because when you use pillowcases to clean, you will avoid dust and dirt flying into your body during that cleaning process.

What you need to do is take an old pillowcase, just the right size to cover each blade of the ceiling fan. Then use your hand to gently move the pillowcase from the inside to the outside of the fan blade, you should manipulate it many times and run out of fan blades. Once done, you will be surprised at the luster of the propeller.

Use a vacuum cleaner to clean the ceiling fan light

It is important that you prepare a vacuum cleaner that works well and a soft cloth to wipe when needed. You will perform the cleaning operation of the ceiling fan light starting from the most dusty part and then gently moving the vacuum cleaner head all over the upper part of the fan blade.

About the fan’s motor, an important part that helps the fan operate smoothly and has high durability. With this part, take the tail of the vacuum cleaner so that you can easily suck the dirt inside the engine and the outer surface of the engine.

Use chemicals to clean ceiling fan light cove

For small details, you need to use small brushes to make it easy to wriggle, and make sure to clean all parts of the ceiling fan. To ensure your safety when cleaning and not damage the ceiling fan, you should note the following:

  • Please turn off the power before cleaning the ceiling fan.
  • Do not use water and wet cloth to clean the motor part of the fan, causing a motor fire.
  • With sophisticated designs, you should handle them carefully to avoid damage.
  • Do not disassemble the fan parts by yourself to avoid damage when reinstalling.
  • It is advisable to prepare the most necessary utensils and items so that the cleaning does not take too much time.
  • Ensure the highest safety for you when cleaning the lamp.

F.A.Q: How to take off ceiling fan light cove?

What electromechanical equipment should be prepared to remove the ceiling fan light cove?

As you prepare to take off the ceiling fan light cove, you also need to prepare some basic tools:

  • Crescent Wrench: Also known as an adjustable wrench, a crescent wrench has a screw that adjusts the width of the wrench by moving either jaw to the right or left.
  • Cordless drill, long drill: Drill holes in different materials need to use a cordless drill to drill holes for lights in the ceiling
  • Voltage Tester: Also known as an electrical test lamp, a tester consists of two conductors to ensure no electricity is flowing through these wires.
  • Wire Cutter: Use this tool to install the ceiling fan by cutting and stripping the ceiling fan wire during assembly and securing screws or unscrewing screws when required for installation.
  • Screwdrivers: The most common types of screwdrivers are flat-head screwdrivers.
  • Insulation Tape: Use insulating tape to insulate all wire connections
  • Ladder: Use a ladder to reach the bracket and hang the ceiling fan from the ceiling.
  • Goggles and gloves: This is protective gear that protects your eyes from dust and your hands from being hit by metal cutting shards.

When does the ceiling fan need to be repaired and maintained?

In the process of using a ceiling fan, it is inevitable that the fan will be damaged or malfunction when operating. You need to remove and take it to repair and maintenance as soon as the fan is not running due to loose connector, because the remote control runs out of battery, screw loose, motor damage or coil fire. In addition, when the fan shows signs of slow rotation, not running cool or making a loud hissing sound, the oil of the internal bearings also needs to be serviced immediately. Don’t forget to regularly take down the ceiling fan and light bulb to clean it.

What are the important notes to keep in mind before removing the ceiling fan light cove cover

To reduce the risk of personal injury and related property damage, you need to follow these 4 safety rules:

  1. Turn off the power at the mains before installing the ceiling fan, check the voltage level, make sure it matches the mains voltage level in your home. This is the first step to help you make good use of the ceiling fan.
  2. Confirm that there are no obstructions at the ceiling fan installation location
  3. Select the socket type that is compatible with the wattage of the ceiling fan light
  4. Read the manufacturer’s instructions for more product information before installation

How many ways to clean fans and light bulbs?

You can use either method or a combination of both for the most perfect cleaning, including using water and drying. For wet cleaning, you need to prepare 1 plastic bucket containing clean water, mixture or cleaning solution, soft sponge, soft cotton towel, A-shaped ladder to wipe directly overhead. For dry cleaning, you need to prepare a small vacuum cleaner, soft cotton towel, small cotton brush or old makeup brush.


Hopefully the sharing of Toby Nwazor will help you properly disassemble and repair the cove ceiling fan in time, avoiding causing more serious problems. Don’t forget to follow my next posts.

Toby Nwazor

Toby Nwazor is a serial entrepreneur, a success coach, a business development consultant, a strategist, a motivational speaker, and a freelance writer. He writes on other cool platforms like Entrepreneur magazine,, Good Men Project, and Business 2 Community and author of website articles . He is the founder of My Startup CEO where he gives kick-ass motivation and provides helpful tips for start-up business success. Follow him on Twitter, and Like MSC on Facebook

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button